22 August 2019

Spotlight- Elematic India

Elematic SEMI Floor ideal for India

 

Precast is a smart, industrialised way to build high-quality buildings of any type in a safe and affordable manner. Factory-made precast ensures shorter construction times, high profitability and consistently high quality. Elematic’s SEMI Floor precast production line is optimal for the vast amount of Indian building projects, thanks to its adaptability, advanced machinery and low set up costs.

 

Pre stressed slabs are ideal for growing economies. Compared to cast-in-situ, precast uses less of everything – less cement, less water and less steel – and produces less waste on-site and in the factory. It is also an energy-saving building method that incorporates good insulation and thermal properties and has lower lifetime costs than any other building solution.

 

“The use of pre stressed hollow-core slabs also lessens the overall load of the building, which has an impact on the foundation requirements. All this brings down the total cost of the structure”, says Chander Dutta, MD, Elematic India

 

 

 

Elematic’s SEMI Floor line is well suited for the production of hollow core slabs, but it can be also used for producing several other slab types such as ribbed/half slabs, solid slabs and piles. It is a sophisticated, mechanized production line with modern advanced machinery for key functions – and it can be started without heavy setup and launch costs. 

 

The required initial investment is approximately 20 per cent  less compared to a similar line with conventional solutions.  The main benefits of implementing SEMI Floor technology include a substantial reduction in concrete consumption, and the reduced amount of steel in the floors. The Elematic SEMI Floor production line is designed to meet the needs of a quick-and-easy start-up in precast floor production. Thanks to innovations in machinery design and fully mechanized operations, the line offers excellent productivity in its class and is simple to operate and maintain.

 

In India, the majority of buildings are still constructed with cast-in-situ methods but more and more developers are now realizing the benefits of precast in wide variety of projects.

 

“Pre stressed precast elements have not been in extensive use – even in large scale infrastructure projects, post tensioning has been the traditional way. Now more businesses are adopting precast, and the awareness of its advantages is growing”, Chander Dutta adds.

 

 

Technical details:

 

Key equipment in the production line includes the Extruder S5, the Saw preparer S5 and the Bed S5, all of which take advantage of fresh new features that result in excellent slab quality and increase factory productivity.  The Extruder S5 employs the original Elematic shear compaction technology that creates top quality end products and brings production costs down by minimizing the use of concrete. It is an extruder that features everything needed for efficient compaction with no superfluous extras, making it a budget-friendly choice.

 

The Saw preparer S5 is a unique innovation, a combination of three processes: sawing, cleaning and strand pulling. Compared to a conventional separate saw and preparer system, the Saw preparer S5 cuts the number of lifts in half. The machine is also incredibly convenient to use: its features include an advanced graphic user interface, a camera system for excellent situational awareness and improved safety, a 4WD for fast cleaning and strand pulling, and fully electronic operation, meaning decreased need for maintenance and higher reliability. The Bed S5 adds even more practical features to the SEMI Floor line, including a high-quality even surface and a rigid steel structure, which guarantee the straightness and evenness of slabs.

 

As with all Elematic production lines, the SEMI Floor is also designed to generate the lowest possible operational costs and the best end products. All machinery in the production line meets the strict requirements of the EC Machinery Directive, and the Extruder is also a low-noise machine (< 85 dB). The line can be –and almost always is – custom-built to suit the particular needs of each specific factory.

 

 

 

Elematic Oyj

 

Elematic Oyj is a world-leading manufacturer of precast concrete plants and production lines. In our more than 50 years of operation, we have supplied technology to over 100 countries and to every continent.

 

The turnover of the company, which employs roughly 230 people, is approximately 100 million euros, of which exports generate 95 per cent. Elematic has subsidiaries and sales offices in the USA, Germany, China, Russia, India, Hong Kong and the United Arab Emirates as well as agents in over 20 countries. The company headquarters is located in Akaa, Finland and its production units are in Finland and India.

 

Elematic has an ISO 9001 certified quality system and the international quality certificate Investor in People for the development of our personnel.

 

 

 

SEMI Floor production line in brief

Theoretical capacity

144-576 m2 / day (one casting)

Personnel

9

Production area

3,000 m2

Land area

4,500 m2

No. of beds

1-4

Max. slab height

320 mm

All figures are estimates.

 

For more details contact:

 

Website: www.elematic.com




Leave a Comment

Name  
Email Address
(will not be published)    
Website
Comment