11 July 2020

Spotlight- MatrixComsec

COSEC’s Biometric Access Control


Security issues pertaining to controlling access is a prime concern and a strenuous challenge in various sectors like Corporate Office, Manufacturing Units, BFSI, Healthcare, and Hotels. These challenges require meticulously planned access control strategies. These strategies can be implemented at exit/entry doors and data centers. They have advanced access control features to improve elevator security. Matrix offers Elevator based Access Control, biometric or RFID card credential to allow only authorised personnel, at allotted time, and to assigned floors.


Advantages and Benefits:




Multiple Credential based Identification

Elevator can be accessed using multiple credentials like Fingerprint, PIN, RFID card, Palm Vein and even with a combination of any.

Flexibility of Selecting Single or Multiple Credential


Create up to 25,000 Users


Time, User, and Floor based Access Control

Assign multiple floors to a user for specified time duration.


Encrypted Communication

Secured End-to-End Communication

Accurate Identification

Hardware Integration

Alarm, buzzer and call buttons can be integrated with the COSEC ARC IO800 controller.

Cost Reduction

Tamper Detection

When any tampering is detected, a notification appears on the monitor screen and an alarm goes off.


IO Linking

Link input event to an output action as per user requirements.



Controlled Access for 32 Floors in one Elevator and eight Elevators in one Panel

Flexibility and Scalability

QR Code based Identification

Simply Scan QR Code on your Mobile for Gaining Access

Reduces Cost and Installation Time


Communication Interface

Provides Ethernet and RS-485 Connectivity Options




  • COSEC PANEL LITE V2 can be configured in standalone mode for device, user, group, and floor configuration.
  • Once a user profile is created, his credential enrolment, floor and group allocation for pre-defined time, is configured.
  • User must show enrolled credential at the biometric device located at:


Outside Elevator: To gain access to elevator, a door controller is installed outside the elevator. The door controller is connected to the elevator call button, which gets enabled, whenever an authorized user shows his enrolled credential.


Inside Elevator: To enable and access the floors that are assigned to the user, a door controller is installed inside the elevator. Some floors like Cafeteria, Reception Area, or Customer Lounge, are kept accessible for visitors/customers.



The solution is highly useful under below mentioned circumstances;

Restrict the Customer to their Specific Floor
E.g.: In Hotels, to assign and control the customers to their respective floor for pre-defined number of days.

Multi-floor Buildings where different floors are leased to different corporates.

E.g.: Corporate offices with multiple floors and having requirement of controlled access to each floor, as it has a high flow of visitors.
Limit Accession Sensitive Floors

E.g.: In Manufacturing Units, to limit access only to authorized group by proper authentication to sensitive zones.


Devices Required:

  • COSEC Device:
  • VEGA series, DOOR series, and PATH series, for authentication.
  • (Any device can be used for authentication for lift as per credential requirement)

(Controllers required as per number of floors. One COSEC ARC IO800 Controller can be used to control eight Floors)



For proper functioning of the system, COSEC Reader/Controller installed inside elevator car, COSEC PANEL LITE and COSEC ARC IO800 controllers, should be in communication with each other.


For more details contact:

Email: customer.care@matrixcomsec.com

Website: www.MatrixAccessControl.com 

Leave a Comment

Email Address
(will not be published)